|
The Phaseomatic Deluxe pedal incorporates an advanced NCO (Numerically Controlled Oscillator) which
is much more powerful than the traditional LFO found in many other modulation effects.
Rotating the 'Wave' knob alters the shape of the modulation waveform; starting with a smooth triangle
wave, moving to a triangle wave and then rounded square wave at the 12 o'clock position. Then there
are rising and falling sawtooth waves, followed by stepped waves with three, four, five six seven
and eight steps depending on the position of the knob.
A highly linear triangle wave shape can be used to create subtle, beautiful and natural chorus effects at medium to higher
modulation rates. At low modulation rates, deep tunnel and jet phasing effects can be obtained. These effects can be further
excentuated by switching in the resonance. The pseudo-square wave is great for those swampy Tube-Vibe tones and the stepped function
is particularly effective at creating haunting and almost vocal sounds with arpeggiated picking sequences.
This is a highly tweakable pedal, so go ahead, experiment and get creative.
For the experimenters, there is an internal trimmer to adjust the amount of feedback in the
phase-shifter section for special resonance or self-oscillation effects. These settings drastically
transform the response characteristics of the phaseomatic and how the control knobs interact with each other and
even the volume control on your guitar. The phaseomatic deluxe's all-tube signal path allows huge
amount of feedback to be injected without overload for some frighteningly
funky phase-wah tones and
weird 1950's sci-fi movie 'tonalities'.
To access the trimmer first power the pedal down and then remove the rear panel.
Caution is advised when using the phaseomatic deluxe in feedback mode. The response is very 'peaky' and
will probably overload transistorised gear. To avoid any unpleasant acoustic surprises
turn down your amp before making any adjustments
to the feedback trimmer. A real pandoras box of sounds but you have to work to get them.
Gain can be tailored to integrate the Phaseomatic Deluxe into your rig. Unity (0dB) up
to 6dB of gain can be achieved by removing the rear panel and replacing the gain resistor
(22KOhms) with the appropriate value. The unit is supplied stock with unity gain. If the
resistor is removed the gain will be 6dB. If the resistor value is reduced, attentuation can also
be achieved.
|