sales@effectrode.com

  • About Us
  • Knowledge Base
    • Tubes
    • Pedals
    • Science of Tone
    • Binson Echorec
    • History
    • Quality
  • News
  • Press
  • FAQ
  • Vacancies
  • My Account
  • Login
logo
  • Store
  • Stockists
  • Artists
  • Contact
  • | Newsletter
  • Store
    • Accessories
    • Pedals
    • Vacuum Tubes
  • Knowledge Base
  • Stockists
  • Artists
  • Contact
  • FAQ
  • About
  • News
  • Press
  • Newsletter
  • 0

    Shopping cart

    0
    Cart is Empty
151_leveling_amplifier_960px
28 Oct

Project ‘X’ a.k.a. the Ultimate Leveling Amplifier… in a Pedal!

We’ve secretly been developing a vacuum tube leveling amplifier pedal which is now in production. The driving force behind this project has been customer requests for a four knob version of our legendary PC-2A photo-optical tube compressor to include attack and knee knobs. We also wanted to add some other really cool features, these include balanced transformer isolated output, gain pad, tube boost, dynamic equaliser and parallel tube input stage (4 triode tube gain stages in parallel) for hyper-quiet operation. This is technically the quietest pedal or studio levelling amplifier ever made, enabling musicians to extract every last nuance from a performance, possibly the finest leveling amplifier you can buy… and it just so happens to be an Effectrode pedal! If you’d like to be added to the waiting list please email us direct.

You must be logged in to post a comment.

48 COMMENTS

Avatar for Danilo

Danilo April 29, 2020 at 12:08:27 Log in to Reply

Any predictions of having LA 1A in stock again?

Avatar for Sam Taylor

Sam Taylor April 29, 2020 at 01:21:35 Log in to Reply

That's a tricky one, we are in the process of building a batch but our supply chain has been effected by COVID-19 and some parts have been delayed. It will totally depend on when we can get our parts but rest assured that we are on the case.

Avatar for Danilo

Danilo February 21, 2020 at 02:03:07 Log in to Reply

Hi Phill, best line for my Effectrode pedals that I found following a standard Fender American Strat equipped with vintage lollar pickup was..Mercury Fuzz> LA 1A Leveling Amplifier> Fire Bottle> Tube Vibe until you reach the Vox AC30. Is this the most "recommended" line? Do the EQ functions of the LA 1A and variant Z of the Fire Bottle work well on this chain?

Avatar for Phil Taylor

Phil Taylor February 21, 2020 at 02:38:22 Log in to Reply

Hi Danilo,The order you're placing your pedals in is exactly what I would recommend. Bear in mind that the 'VARI-Z' on the 'Fire Bottle' won't have any effect whilst the 'Mercury' fuzz and/or Leveling Amplifier are engaged as its input stage needs to 'see' your guitar pickup impedance to form a circuit. The 'Dynamic EQ' will function in all scenarios. Best, Phil

Avatar for bfrye55

bfrye55 April 25, 2019 at 09:05:07 Log in to Reply

I just purchased a new LA-1A on Reverb, to be used not with a guitar or bass, but with a vintage 1979 Fender Stage 73 Dyno-My-Piano. Having read almost everything there is online about this pedal, I"m excited to see how it enhances the musicality and tone of my Dyno. Bob

Avatar for Phil Taylor

Phil Taylor April 30, 2019 at 08:15:04 Log in to Reply

I hope the Effectrode Leveling Amplifier delivers the tones you're looking for Bob. Best regards, Phil

Avatar for bfrye55

bfrye55 May 3, 2019 at 12:27:18 Log in to Reply

hi Phil - The LA-1A is amazing in this application... as I put the LA-1A into the signal chain, the experience was frankly mind-blowing. Love the fully variable Knee control, much more musical than a fixed switch between hard and soft Combined with the variable Attack control, you have an infinite range of responses that enable you to tailor the feel and musicality of the onset and response of the compressor in ways I’ve never experienced before. Brilliant and Highly Musical. The Dyno Rhodes is quite a challenging instrument to record and amplify. The Dyno has an incredible dynamic range. the result of several modifications, including: the addition of high gain active electronics, the physical relationship between the pickups and tines, the tonal balance, and the keyboard action itself. The dynamic nature of the Dyno is both a blessing and a curse - exploiting the full range of dynamics with consistency can be a challenge. Not only is the dynamic range much greater, but the timbral range is also far wider. In the upper octaves where the tines are so short, maintaining note to note smoothness in response and tone can be tricky. In short, the Dyno is a perfect candidate for a high quality, high resolution compressor / limiter. While comps typically narrow the dynamic range of the source audio, the LA-1A increases the playable dynamic range, as the lightest touch can now be used successfully with a note to note smoothness in tone and response that, without the LA-1A, would be elusive at best. At the Dyno player digs in and plays with more force and energy, the smoothness that the LA-1A imparts on the sound continues to deliver exceptionally musical results. I was floored to discover that this Limiting Amplifier increases the playable, musically useful dynamic range of the Dyno. Amazing! Note to note irregularities in the top octaves are smoothed out with the LA-1A, so the pitch range and tonal range of the Dyno is now enhanced and increased, making the entire range of 73 notes usable, more lyrical. The LA-1A delivers a smoothness and warmth that brings the sound alive. Playing with the make-up gain, I discovered the LA-1A could make the Dyno more “reactive” – the Dyno is after all, an electro-mechanical / acoustic instrument. At higher gain settings, the LA-1A brought the Dyno alive, in much the same way that a guitar responds to higher gain. In summation, the LA-1A brings extremely MUSICAL results that are profound. I’ve never experienced another comp/limiter like it, and with the LA-1A in the signal path for my Dyno, an entirely higher level of inspiration awaits every time I sit down.The LA-1A is simply the most MUSICAL comp / limiter I’ve ever used. It delivers a wider, more useful dynamic range, a wider tonal and pitch range, and a warmth and smoothness that is beyond inspiring. Amazing!!

Avatar for Phil Taylor

Phil Taylor May 19, 2019 at 09:09:44 Log in to Reply

Thank you. I'm delighted to hear that your Leveling Amplifier is doing what it was designed for - making music and making musicians happy. Thanks again for taking the time to get back to us with feedback - it's always great to hear positive feedback. All the best, Phil

Avatar for csharpmafia

csharpmafia January 31, 2019 at 04:19:13 Log in to Reply

Phil, The first 2 pedals in my chain are the Fire Bottle and the PC2A compressor. I have a LA1A at the end of my chain (after drive and blackbird pedals). I have been thinking lately of replacing the Fire Bottle and the PC2A compressor with a second LA1A - do you think I'd lose any of the clean boost I get with the Fire Bottle by using the leveling amp? Thanks! Jason

Avatar for Phil Taylor

Phil Taylor January 31, 2019 at 09:51:24 Log in to Reply

Hi Jason, The Fire Bottle has a a great deal more gain than the Leveling Amplifier and the 'Harvard' tone stack is voiced for a bright and bold tone. This means the Leveling Amplifier is not really a straight replacement for it and the PC-2A compressor. That said, it really depends on how much brightness, clarity and level you can sacrifice without it adversely affecting your signature tone. Best regards, Phil

Avatar for Brad

Brad June 6, 2018 at 08:42:14 Log in to Reply

Phil,I would love to get one of these when you produce more! Please add me to a list if possible,Thanks Brad

Avatar for Phil

Phil June 20, 2018 at 08:46:58 Log in to Reply

Hi Brad, I've forwarded your details to Sam so she can put you on the Leveling Amplifier waiting list. Thanks, Phil

Avatar for Pierre

Pierre March 11, 2018 at 12:32:40 Log in to Reply

Hello Phil,Can I be on list for the next batch?Regards,Pierre

Avatar for Phil

Phil March 11, 2018 at 11:08:28 Log in to Reply

Hi Pierre, I've passed your details on to Sam so she can make sure you are on the waiting list. Thanks, Phil

Avatar for Pierre

Pierre April 2, 2018 at 09:16:17 Log in to Reply

Geat, thank you!

Avatar for Phil

Phil April 5, 2018 at 01:34:15 Log in to Reply

You're welcome.

Avatar for Ben

Ben December 5, 2017 at 04:04:57 Log in to Reply

+1 on using both the PC-2A and LA-1A. I had originally thought the LA-1A would replace my PC-2A on my main pedal board and that I'd be able to move the PC-2A over to a dedicated DI setup I have for my Taylor acoustic / electric. However, having BOTH in the signal chain has opened up several possibilities and sounds that I'd never considered before. They're both so quiet and "musical" that they can really be used anywhere. I've been experimenting with keeping the LA-1A first in my chain, but moving the PC-2A and Firebottle all around within the chain with some truly great results. The key is having the PC-2A and Firbottle make subtle tweaks to the tone before / after certain other effects (delay, flanger, chorus, Tube-Vibe, etc). Experimentation is highly recommended. You really can't go wrong.

Avatar for Gerry

Gerry November 29, 2017 at 05:20:33 Log in to Reply

Quiestest pedal or studio levelling amplifier ever made, you reckon? Give us some numbers then!

Avatar for Phil

Phil November 29, 2017 at 08:45:34 Log in to Reply

Hi Gerry, With the input short circuited to ground the measured self-noise (that is, shot combined with 1/f noise) for the Leveling Amplifier is -6dB/oct lower across the entire audio spectrum (20Hz to 20KHz) relative to the PC-2A Compressor.

Avatar for Eduard

Eduard November 22, 2017 at 10:02:14 Log in to Reply

Hi Phil,When are you planning pn releasing the delta trem en the phaseomatic deluxe?Cheers, Eduard

Avatar for Phil

Phil November 27, 2017 at 05:19:18 Log in to Reply

Hi Eduard, We were expecting to release these pedals in Autumn, but are running a little behind schedule. Will be announcing a revised release date shortly. Apologies for the dealy. Best, Phil

Avatar for Troy

Troy November 19, 2017 at 04:34:51 Log in to Reply

Thanks Phil.I will also add that having the LA-1A post-drive can add some of the tone & feel of a cranked up master volume or cranked non-master volume amp at lower levels. Useful for both home jamming & in those live situations when stage volume is limited by venue or sound man's dictates. Also for recording purposes.This is also informing my plan to experiment with the Tube Drive after the Blackbird on both the clean channel & the blue channel (with the LA-1A following the Blackbird) to see if I can dial in the Tube Drive to emulate a driven power amp tone. The fact that the sound of the LA-1A after the Blackbird evoked a more highly cranked amp has led me to this idea.While that particular application stands an equal chance of not working I nevertheless feel that this way of thinking can help one reach the most optimal signal chain placement for the Effectrode pedals which are so incredibly beautifully interactive. Thoughtful experimentation combined with contemplation really yields the best outcome in tone(as) as in life.As you wrote - following your initial suggestions - above Phil: "conventional wisdom doesn’t always work. Effects pedal placement depends on the effect you’re trying to achieve. ... Rules are there to be broken, but you have to know what the rules are in the first place if you’re going to break them!"Having the PC-2A pre-drive & the LA-1A post-drive is - for me, at the moment - really "the best of all worlds" in terms of tones involving compression/limiting. Sounds that I had only before heard in some of my favourite recordings that I know involved some skilful post-recording application of compression & limiting now jump out of my (already wonderful sounding) amp speakers further enhanced. LA-1A after Mercury > Blackbird blue channel for example: It's like having a virtual Eddie Kramer tweaking inside the amp!My suggestion Phil & Sam for the website: A user forum to share & swap tips to get the most out of individual & combined Effectrode tone tools. For example: Im considering placing an LA-1A in the loop of my amp, Normally I send everything through the front end but I can see a possibility that the LA-1A could help balance the often quite large volume jump when I kick in the extra pre-amp valve in my Marshall Vintage Modern amp heads. To be able to share findings & exchange tips with fellow users could be of great benefit to all Effectrode users I am sure.The LA-1A after my drives is the missing tonal link that I didn't realise that was missing until I heard it. Sure, when cranking the amp it might be less useful in that position, but for recording & for lower SPL's it can really help one to get the most out of even a 100-watt amp.My amps have Post-Phase Inverter Master Volume's (PPIMV's) so I am thinking of experimenting with placing the LA-1A in the loop with the Boost on & then adjust the volume to match unity (when boost is on -so as not to overly drive the PPIMV) & then switch the boost off (but have the "jangle" engaged) for a rhythm level.

Avatar for Troy

Troy November 16, 2017 at 02:40:54 Log in to Reply

Just correcting two typos from my post above:Discussing the Fire Bottle:"the Vari-Z is a fantastic feature to minimise the need to guitar" should read: "the Vari-Z is a fantastic feature to minimise the need to swap guitars"Discussing the LA-1A:"the boost feature can raise just the level for load tones" should read: should read: "the boost feature can raise just the level for lead tones"Late night typing!

Avatar for Phil

Phil November 18, 2017 at 08:08:05 Log in to Reply

No problem Troy, Thank you for sharing your insights on the Limiting Amplifer. All the best, Phil

Avatar for Troy

Troy November 16, 2017 at 02:31:59 Log in to Reply

Please excuse the following comment length, hopefully fellow Effectrode enthusiasts will find some of it helpful (I'd love to read your findings too):The LA-1A is an incredible accomplishment, surpassing the tonalities & capabilities of the PC-2A to manifest what is surely the finest sonic compression & limiting guitar tool in pedal form (or in any form) that has ever been on the market.For those above who have enquired about the "best" signal chain placement (Thibaut, Ben & Lindsay) & whether or not it makes having a PC-2A redundant (Amanda) I will have to respectfully disagree with you Phil on both counts (which I will qualify):I already have the PC-2A & that is staying put on my board(s). The LA-1A definitely complements the PC-2A. If one had to only have one of these pedal then no doubt the LA-1A would be the one. In that case one might opt to have it earlier in the chain (pre-dirt/drive). But having the PC-2A as well frees the LA-1A up significantly in terms of placement.Here's my tuppence worth:I was already placing the Mercury first (to allow for unimpeded interaction with the guitar's volume knob (although I should note I don't use fuzz as an "always on" pedal as some do), followed by the Fire Bottle booster (placed early in the chain to utilise the Vari-Z when needed - though I normally don't use it as I have guitars with a variety of pickups - it should however be noted that the Vari-Z is a fantastic feature to minimise the need to guitar), then followed by the PC-2A (which is mostly set subtly allowing level boosts from the Mercury & Fire Bottle to come through - just adjust to taste).Having the Glass-A buffer (which is always on as it has no bypass switch) after these (although I could place it just before the PC-2A) allows for the signal strength to maintained (some use the Fire Bottle or PC-2A as "always on" pedals for this reason). This then feeds into the Tube-Vibe, the Tube Drive & then the Blackbird (though I'm musing about experimenting with the Tube-Drive after, though it sounds brilliant where it is).So having the option of moving the PC-2A to another board or keeping it where it is (& using it differently to the LA-1A, although sometimes in combination) I opted for the latter for the following reasons:The PC-2A is now freed up to be used in a more nuanced way with the drive pedals after it. Lower the drive on those & maintain the sustain with the PC-2A for "cleaner" sustaining lead tones for example - or to use it to accent certain selections of notes even. Also use it pre-drive to allow for switching between different intensities of drive from the dirt pedals following it for rhythm tones. An "always on" compressor placed pre-drive simply removes these sonic options.The LA-1A is then freed up to be placed post-drive where (if used wisely) it can enhance all tone tools before it. Having it placed here it can be "always on" & the boost feature can raise just the level for load tones - or to have two different levels of dirt tones without changing gain intensities (the Fire Bottle & the PC-2A taking care of the latter superbly). Also: having the pre-dirt PC-2A off & the post-dirt LA-1A on allows for guitar volume knob control of intensity of drive when desired (yet still maintaining more volume level than would be the case if it wasn't there.This placement with the set-up allow for certain tones to be achieved while playing in "realtime" that would otherwise just be the preserve of post-recording production. These tones are too good to lose by placing drives after the LA-1A which would just mask it's radiant beauty (& no I don't think that that is hyperbole!)Then there is the ability of being able to feed the PC-2A into the LA-1A for a special treat (with "jangle" optionally activated on the latter's switch). Fantastic!

Avatar for Juan Casas-Rigall

Juan Casas-Rigall November 13, 2017 at 03:20:36 Log in to Reply

Hi, Phil. I suppose the Leveling Amplifier is already in production, because it's on Reverb. Let us know, please.

Avatar for Phil

Phil November 13, 2017 at 04:59:51 Log in to Reply

Hi Juan, Yes the Leveling Amplifier is in production. We've sold out the first run but will be making some more shortly.

Avatar for Juan Casas-Rigall

Juan Casas-Rigall November 14, 2017 at 06:19:01 Log in to Reply

Thanks, Phil. Just one more question: Will the LA be offered in your web? Regards.

Avatar for Phil

Phil November 18, 2017 at 08:06:30 Log in to Reply

Hi Juan, Yes it will be on be on our website eventually. We have the next batch of Limiting Amplifiers scheduled for spring 2018. Best regards, Phil

Avatar for Lindsay Stirton

Lindsay Stirton November 6, 2017 at 10:18:09 Log in to Reply

I am excited by this. Will definitely order one soon. Re: your advice on pedal order. I have been using a Fire Bottle as my main gain pedal, pretty much always on, though I play with the boost know quite a lot from completely off to all the way on. That said, I have a Buffalo fx Evolution distortion pedal that gets occasional use when I want some heavy distortion. I play in Church, and much as I try to find opportunities to make the hymns rock out, I can't just play everything on 11. The Evolution sounded awful as long as it came after the Fire Bottle, so if I wanted some distortion, I had to turn the Firebottle off. I now have the Evolution first in the chain (but bear in mind it is usually off, and it is a true bypass pedal). That is a gorgeous, luscious, rich OD/distortion sound. Just saying that the conventional wisdom doesn't always work.

Avatar for Phil

Phil November 6, 2017 at 12:19:07 Log in to Reply

Hi Lindsay, You're right: conventional wisdom doesn't always work. Effects pedal placement depends on the effect you're trying to achieve. For example, you can place a compressor pedal pre- or post-distortion or both. Rules are there to be broken, but you have to know what the rules are in the first place if you're going to break them! Best, Phil

Avatar for Fabian

Fabian November 5, 2017 at 06:47:36 Log in to Reply

#28 checking in: This IS a very nice pedal.. if I mention that it put my tone into another STRATosphere would that be bad?lol Great work, I even love the Jangle option I hadn't been expecting. Dunno if it will do any duty off the pedal board but good to know just how quiet/useful it could be if needed. Thanks again!

Avatar for Phil

Phil November 6, 2017 at 12:20:10 Log in to Reply

Thank you for your feedback on the new Leveling Amplifier pedal Fabian. Good to hear it it hits the mark. Best regards, Phil

Avatar for Justin

Justin November 2, 2017 at 08:08:01 Log in to Reply

Must say I am proud owner of LA-1A #001 I'm definitely bragging here :) Phil, this pedal screams Effectrode quality and musicality. Was awaiting this release for awhile and the wait was worth it.

Avatar for Phil

Phil November 2, 2017 at 11:08:15 Log in to Reply

Thanks Justin - delighted to hear project 'X' has hit the mark for you. :)

Avatar for Ben

Ben November 3, 2017 at 01:35:54 Log in to Reply

While I missed out on S/N #001, I was lucky enough to get the S/N that corresponds to a famous British Secret Agent who likes his martinis shaken, not stirred!Yes, Phil, you've done it again. Truly amazing pedal.I received it yesterday and as soon as I plugged it in, my Fender amp decided to blow a fuse (no fault of the LA-1A). After tracking down the culprit (a bad power tube), I was back up and running and have really been exploring the LA-1A.Dead quiet and it seems to offer even more clear sustain than the excellent PC-2A when the gain knob is cranked fully clockwise and operating as a compressor ("knee" knob fully CCW). Is this correct, Phil, or am I imagining it?Also, I've been running it today 2nd in my chain, behind a FB-1A Fire Bottle to get the interaction with my strat's single coil pickups (still pretty darn quiet). What are your thoughts on this arrangement, Phil or would you still recommend putting the LA-1A first?Thanks yet again!- Ben

Avatar for Amanda Catherine

Amanda Catherine November 4, 2017 at 04:34:37 Log in to Reply

Wow, this is amazing! Splashdown in good ‘ol PDX Complete! What a nice surprise Project X has been, and here I have been, pining and pining for a certain bronze chassis to come into my life... Someday. I thought I was on the verge of getting a #13 tattoo, but mine is actually number 18! Yay! I thought the chassis was going to be white, but they are a beautiful gunship grey! Thank you again, Phil, for sculpting such wonders.On a more technical note, it seems as though a leveling amplifier (THAT circuit style) is a little different from other compressors. Should one still consider the PC-2A as well, or are all needs for a funky squish now fullfilled?

Avatar for Phil

Phil November 4, 2017 at 11:24:23

Hi Amanda, The Leveling Amplifier should do everything the PC-2A does. That said, there may be some some subtleties I'm not aware of that someone with more finelt tuned ears can discern, but in principle it should cover the range of the PC-2A. Thanks for letting me know it landed safely over there. Best, Phil

Avatar for Phil

Phil November 4, 2017 at 11:28:37 Log in to Reply

Hi Ben, No, I don't think you're imagining it at all - putting tubes in parallel reduces noise and does seem to improve clarity. I'm not sure what it happening techincally to cause this but it could be something related to the tubes sharing the the work and improved electron emission.Regarding pedal order: if you put the Leveling Amplifier first you'll obtain the best possible signal to noise ratio as the LA-1A is the quietest pedal we make. In ths scenario the Vari-Z on the Fire Bottle won't have any effect though as it is buffered from interacting with the guitar pickup. If you place the Fire Bottle first the Vari-Z will function, however the LA-1A will be compressing the boosted signal from the Fire Bottle. In this scenario the boost capability is literally being limited by the LA-1A. The 'best' order of these effects really depends on what works for you. My preference would be Leveling Amplifier first. All the best, Phil

Avatar for Thibaut Revel

Thibaut Revel October 30, 2017 at 08:31:50 Log in to Reply

Hi,It looks wonderful! Where would you typically place this pedal in the signal path? Has it the same purpose as a PC-2A or is it meant to be used differently? Thanks!

Avatar for Phil

Phil November 2, 2017 at 11:13:33 Log in to Reply

Hi Thiabut, In practically all cases I recommend placing the Leveling Amplifier first in the signal chain. This is because the tube circuitry is extremely quiet and will boost the guitar signal whlist keeping noise and hum to an absolute minimum. Best, Phil

Avatar for Thibaut

Thibaut October 29, 2017 at 10:59:55 Log in to Reply

Looks wonderful! What would be the designated location in the signal path for this pedal? Same use as a PC-2A or has it a different purpose? Thanks!

Avatar for Ian Hamilton

Ian Hamilton October 29, 2017 at 02:56:56 Log in to Reply

Can the tube boost function be attenuated or even turned off in this new pedal? I do get that there may inherently be some "boost" with signal levellin/compression, but it would be nice to keep the actual boost minimized for some tones as it is nice to let the amp break up naturally, or alternatively to maintain a clean tone. Thanks so much!

Avatar for Phil

Phil November 2, 2017 at 11:15:41 Log in to Reply

Hi Ian, Yes the tube boost can be bypassed and adjusted from 0dB up to 6dB when engaged.

Avatar for Douglas Robertson

Douglas Robertson October 29, 2017 at 01:17:17 Log in to Reply

Very exciting to see this, Phil! What stage/tube is involved in the Boost? I'm guessing one half of the AT7?

Avatar for Phil

Phil October 29, 2017 at 10:15:31 Log in to Reply

Hi Doug, The additional 6dB of gain comes from a resistive divider circuit in the output stage.

Avatar for Douglas Robertson

Douglas Robertson October 29, 2017 at 04:08:11 Log in to Reply

Cool way to do it. Thanks! Effectrode never fails to impress.

logo
+44 (0) 1782 372210 sales@effectrode.com
facebook instagram twitter pinterest rss soundcloud
Newsletter

Useful Links

  • Shipping Policy
  • Refund Policy
  • WEEE Policy
  • Privacy Policy
  • Warranty Policy
  • Register Your Pedal

Instagram

Copyright © 1963-2022 EFFECTRODE THERMIONIC. All Rights Reserved.
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. However, you may visit "Cookie Settings" to provide a controlled consent.
Cookie SettingsAccept All
Manage consent

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary
Always Enabled
Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.
CookieDurationDescription
_GRECAPTCHA5 months 27 daysThis cookie is set by Google. In addition to certain standard Google cookies, reCAPTCHA sets a necessary cookie (_GRECAPTCHA) when executed for the purpose of providing its risk analysis.
cookielawinfo-checkbox-advertisement1 yearSet by the GDPR Cookie Consent plugin, this cookie is used to record the user consent for the cookies in the "Advertisement" category .
cookielawinfo-checkbox-analytics11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional11 monthsThe cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance11 monthsThis cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
JSESSIONIDCookie used to allow the Worldpay payment gateway on the website to function.
machineCookie used to allow the Worldpay payment gateway on the website to function.
viewed_cookie_policy11 monthsThe cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.
wordpress_logged_in_Users are those people who have registered an account with the WordPress site. On login, WordPress uses the wordpress_[hash] cookie to store your authentication details. Its use is limited to the Administration Screen area, /wp-admin/ After login, WordPress sets the wordpress_logged_in_[hash] cookie, which indicates when you’re logged in, and who you are, for most interface use. WordPress also sets a few wp-settings-{time}-[UID] cookies. The number on the end is your individual user ID from the users database table. This is used to customize your view of admin interface, and possibly also the main site interface.
wordpress_sec_1 yearProvide protection against hackers, store account details.
wordpress_test_cookieTest to see if cookies are enabled.
wp-settings-1 yearWordPress also sets a few wp-settings-{time}-[UID] cookies. The number on the end is your individual user ID from the users database table. This is used to customize your view of admin interface, and possibly also the main site interface.
Functional
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
CookieDurationDescription
_gat1 minuteThis cookie is installed by Google Universal Analytics to restrain request rate and thus limit the collection of data on high traffic sites.
Analytics
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
CookieDurationDescription
_ga2 yearsThe _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors.
_gid1 dayInstalled by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously.
Advertisement
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
CookieDurationDescription
mailchimp_landing_site1 monthThis cookie is used to keep track of newsletter sign ups and client emails at checkout, Mailchimp utilises cookies to store information captured from user input for remarketing purposes.
mailchimp_user_email1 monthThis cookie is used to keep track of newsletter sign ups and client emails at checkout, Mailchimp utilises cookies to store information captured from user input for remarketing purposes.
mailchimp_user_previous_email1 monthThis cookie is used to keep track of newsletter sign ups and client emails at checkout, Mailchimp utilises cookies to store information captured from user input for remarketing purposes.
mailchimp.cart.current_emailThis cookie is used to keep track of newsletter sign ups and client emails at checkout, Mailchimp utilises cookies to store information captured from user input for remarketing purposes.
mailchimp.cart.previous_emailThis cookie is used to keep track of newsletter sign ups and client emails at checkout, Mailchimp utilises cookies to store information captured from user input for remarketing purposes.
Others
Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.
CookieDurationDescription
woocommerce_recently_viewedsessionDescription unavailable.
SAVE & ACCEPT
Powered by CookieYes Logo